|
i reallay appreciate for certsbraindumps and all participants.
|
Question 1.
You work as the Exchange Administrator at ABC.com. The ABC.com network has an Exchange Server 2007 infrastructure. The network contains a mailbox named TestResources. At present all users are able to diarize appointments for TestResources. A new company policy states that only Kara Lang and Mia Hamm are permitted to diarize appointments for TestResources.
What actions must you take to comply with the ABC.com policy?
A. You should run the following cmdlet:
Set- MailboxCalendarSettings - Identity"TestResources" - MonthCalendar calendar = new
MonthCalendar(); KaraLang , MiaHamm.
B. You should run the following cmdlet:
Set-MailboxCalendarSettings - Identity " TestResources" - BookInPolicy KaraLang , MiaHamm
-AllBookInPolicy $false cmdlet.
C. You should run the following cmdlet:
Set - MonthCalendar calendar = new MonthCalendar(); “host.KaraLang , MiaHamm = calendar
" this.Content = host;.
D. You should run the following cmdlet:
Set - MonthCalendar calendar = new MonthCalendar();
HwndSource source = HwndSource.FromHwnd(calendar.Handle);
this.Content = calendar;Delegates KaraLang , MiaHamm.
Answer: B
Explanation:
Question 2.
You work as the Exchange Administrator at ABC.com. The ABC.com network has an Exchange Server 2007 environment. ABC.com has headquarters in London and branch offices in Paris and Berlin. The marketing department is located at the Paris office. The personnel in Paris connect to the network through the Internet and use Outlook Anywhere on their laptops. To ensure productivity management wants you to make sure that the marketing personnel have access to the companies' mailboxes.
What actions must you take?
A. You should utilize the Test- MAPIConnectivity and the Test- WebServicesConnectivity cmdlet.
B. You should utilize Get- Recipient – Filter cmdlet.
C. You should utilize Show-MailboxStatistics cmdlet.
D. You should utilize List-Mailbox cmdlet.
Answer: A
Explanation:
Question 3.
You work as the Exchange administrator at ABC.com. The ABC.com network has an Exchange Server 2007 environment. The ABC.com network has an Exchange Server 2007 environment. The Edge Transport Server role is installed on a server named ABC-EX01. Due to this server failure, you have decided to install a new Microsoft Windows Server 2003 server named ABCEX03 on the network with the reinstallation of the Edge Transport Server role. However, the address rewrites that was functional on ABC-EX01 did not in operation on ABC-EX03. This functionality is needed.
What actions must you take?
A. You should use the ImportEdgeConfig.ps1 on ABC-EX03.
B. You should use the iiscnfg/enable: application name check version.
C. You should use the Transaction Logs for sp_configure configuration.
D. You should use create a new Send connector on ABC-EX03.
Answer: A
Explanation:
Question 4.
You work as the Exchange administrator at ABC.com. ABC.com has headquarters in London and a branch office in Paris. The Exchange Server 2007 server in the London office is named ABCEX07 and the Exchange Server 2003 server in the London office is named ABC-EX08. You need to transfer the mailbox from ABC-EX07 to ABC-EX08.
What actions must you take?
A. You should include the IgnoreRuleLimitErrors parameter when using the Move-Mailbox
cmdlet.
B. You should use the System configuration data collector.
C. You should create a mapping schema definition.
D. You should enable the Windows Remote Management (WinRM).
Answer: A
Explanation:
Question 5.
You work as the Exchange administrator at ABC.com. ABC.com has its headquarters in Chicago and a branch office in Dallas. You are implementing a new Exchange Server 2007 Organization. The Exchange Server 2007 environment of ABC.com has the following server installed:
• An Edge Transport server named ABC-EX01
• A Hub Transport server named ABC-EX02.
During the course of the day you have received instruction from the CIO to have e-mail routing configured on ABC-EX01 and ABC-EX02. In your solution you need to ensure that ABC-EX01 is able to transmit e-mail messages to and from the Internet. You should also ensure that Internet email is sent to ABC-EX01 via ABC-EX02.
What actions must you take?
A. You should use the Microsoft System Center Configuration Manager (SCCM).
B. You should export a new Edge Subscription file to ABC-EX01 and Import the Edge
Subscription file to ABC-EX02.
C. You should use the Microsoft System Center Operations Manager (SCOM).
D. You should use the Microsoft Exchange Internet Message Access Protocol, Version 4
(IMAP4).
Answer: B
Explanation:
Question 6.
You work as the Exchange administrator at ABC.com. The ABC.com network has an Exchange Server 2007 environment. You were compelled to restore the directory objects and settings from a backup. However, after the restoration a number of employees reported that they are unable to access their mailboxes that were assigned to them before the backup was made. The employees need to access their mailboxes.
What actions must you take?
A. You should use the Get-Mailbox cmdlet.
B. You should use the Get-MailboxInformation cmdlet.
C. You should use the Connect-Mailbox cmdlet.
D. You should use the Show-Information cmdlet.
Answer: C
Explanation:
Question 7.
You work as the Exchange administrator at ABC.com. The ABC.com network has an Exchange Server 2007 environment. During routine maintenance of the Exchange server you discover that the storage limits are all different in the mailboxes.
What actions must you take to ensure that the storage limits to be the same?
A. You should use the Get-MailboxStatistics cmdlet and forward it to the Get-Mailbox cmdlet.
B. You should use the Show-MailboxStatistics cmdlet and forward it to the Select-Object cmdlet.
C. You should use the Get-MailboxInformation cmdlet and forward it to the Select-Object cmdlet.
D. You should create an Exchange Management Shell script and forward the Get-Mailbox
Database cmdlet output to the Set-Mailbox Database cmdlet.
Answer: D
Explanation:
Question 8.
You work as the Exchange administrator at ABC.com. The ABC.com network has an Exchange Server 2007 environment. The ABC.com network contains a stand-alone server named ABCSR09. Your boss, Tess King, wants to know which Exchange Server 2007 server role can ABC-SR09 support.
What would you reply?
A. It can support the Terminal Service Session Broker (TS Session Broker) role.
B. It can support the Edge Transport server role.
C. It can support the PDC emulator role.
D. It can support the Exchange Recipient Administrators role.
Answer: B
Explanation:
Question 9.
You work as the Exchange Administrator at ABC.com. The ABC.com network has an Exchange Server 2007 infrastructure that has two Client Access Servers with load balancing. The employees on the intranet has 24/7 access to data when utilizing Outlook Anywhere. During the course of the day you have received instruction from the CIO to ensure that the employees who connect to the Exchange infrastructure via the IUnernet also have access to data 24/7.
What actions must you take?
A. You should enable the Microsoft Exchange Information Store.
B. You should enable the Microsoft Exchange Search Service.
C. You should set the external URL on every Client Access Server.
D. You should enable the Microsoft Exchange File Distribution service.
Answer: C
Explanation:
Question 10.
You work as the Exchange administrator at ABC.com. The ABC.com network has an Exchange Server 2007 environment. You have received several complaints from employees in various departments stating that e-mail messages are ending up in their Junk E-mail folder even though the sender’s e-mail address is on their Safe Senders List. You need to ensure that the employees' Safe Senders Lists are used.
What actions must you take?
A. You should modify the SMTP Send connectors.
B. You should utilize the Get-Mailbox cmdlet.
C. You should utilize the Show-Information cmdlet.
D. You should utilize the Update-SafeList cmdlet on each mailbox.
Answer: D
Explanation:
|
Question 1.
Which of the following are Link State protocols?
A. BGP
B. RIP
C. OSPF
D. IS-IS
Answer: C, D
Question 2.
ECMP supports which of the following. Choose the best answer.
A. 8 equal-cost paths per destination learned from any protocol
B. 16 equal-cost paths per destination learned from any protocol
C. 8 equal-cost paths per destination learned from the same protocol and preference
D. 16 equal-cost paths per destination learned from the same protocol and preference
E. 4 equal-cost paths per destination
Answer: D
Question 3.
Which of the following statements best describes the function of the RTM?
A. From the router's route table, select the best routes to be installed in the FIB for forwarding
data.
B. Based on the metrics of the routingprotocol, chose the lowest cost route to be installed in the
route table.
C. Apply the BGP route selection criteria to select the best route to be installed in the route table.
D. Select the preferred route from the various routing protocols to be installed as the active route
in the route table.
E. Apply the assigned import and export policies to determine the routes to be advertised to the
router's neighbors.
Answer: D
Question 4.
What items are carried in a typical classless routing update? Select the best answer.
A. Network address, mask and metric
B. Network address and metric
C. Prefix and mask
D. prefix, next-hop and metric
E. prefix and next-hop
Answer: A
Question 5.
Choose the most accurate statement about the connections between eBGP peers.
A. eBGP peers are usually directly connected to each other.
B. eBGP peers are always directly connected to each other.
C. eBGP peers are never directly connected to each other.
D. eBGP peers are usually directly connected to each other, unless they are in the same
autonomous system.
E. eBGP peers are usually not directly connected to each other, additional configuration is
required if they are.
Answer: A
Question 6.
What message is issued by a neighbor as a response to a valid Open?
A. Keepalive
B. Open
C. Exchange
D. Notification
E. Ping
Answer: A
Question 7.
Which of the following is not exchanged in a BGP Open message?
A. BGP version number
B. The local AS number
C. The hold time
D. Thekeepalive timer
E. The Router ID
Answer: D
Question 8.
The state of one BGP neighbor shows Established, which of the following is false?
A. The router has established a complete session with that neighbor.
B. BGP can exchange update, notification andkeepalive messages with that neighbor
C. If thekeepalive timer expires, the local system sends a keepalive message and restarts its
keepalive timer
D. If the local system receives a notification message, it changes its state toOpenConfirm
E. Established is the operational state
Answer: D
Question 9.
Which of the following is a Well Known Mandatory attribute?
A. Origin Code
B. Local Preference
C. MED
D. AS Path
E. (a) and (d)
F. (b) and (d)
Answer: E
Question 10.
Which of the following is true, based on the AS Path list shown here? 65206 65111 65100
A. AS 65206 originated the route
B. AS 65111 is a transit AS
C. AS 65100 is a transit AS
D. AS 65100 originated the route
E. (b) and (d)
F. (a) and (c)
Answer: E
|
Question 1. How many databases does a Link State routing protocol use? A. One B. Two C. Three D. Four Answer: C Question 2. In an IP datagram, which field identifies the receiving application A. The protocol field of the transport layer header B. The port field of the transport layer header C. The protocol field of the network layer header D. The port field of the network layer address Answer: B Question 3. A static route is created using the command "static-route 0.0.0.0/0 next-hop 3.3.3.1". What command could be used to test the static route on an Alcatel-Lucent 7750 SR? A. Ping static 3.3.3.1 B. Ping static 0.0.0.0/0 C. Ping 3.3.3.1 D. Ping 0.0.0.0 Answer: C Question 4. A static route is created using the command "static-route 2.3.4.0/24 next-hop 1.2.3.4". What is the correct traceroute command to test this static route on an Alcatel-Lucent 7750 SR? A. traceroute 2.3.4.1 B. traceroute 2.3.4.0/24 next-hop 1.2.3.4 C. traceroute next-hop 1.2.3.4 D. traceroute does not work on the Alcatel-Lucent 7750 SR Answer: A Question 5. Which one of the commands below will create a static route to network 2.3.4.0/24 on the AlcatelLucent 7750 SR router? A. Static route 2.3.4.0 255.255.255.0 next hop 3.4.5.6 B. Static-route next-hop 3.4.5.6 2.3.4.0/24 C. Static route 2.3.4.0/24 next hop 3.4.5.6 D. Static-route 2.3.4.0/24 next-hop 3.4.5.6 Answer: D Question 6. A default route for a client is also known as the: A. Default path B. Default gateway C. Gateway path D. Proxy ARP Answer: B Question 7. What is the default preference value for a static route in the Alcatel-Lucent 7750 SR router? A. 0 B. 5 C. 10 D. 15 Answer: B Question 8. What command could be used to verify proper configuration of a static route in an Alcatel-Lucent 7750 SR router? A. Show route-table B. Show router routing-table C. Show router route-table D. Show static Answer: C Question 9. What address is used when RIPv2 uses multicast to send its updates? A. 224.0.0.5 B. 224.0.0.6 C. 224.0.0.9 D. 224.0.0.10 E. RIPv2 does not have support for multicast Answer: C Question 10. What is the metric and maximum routable value for RIP? A. Hop count and 16 B. Hop count and 15 C. Link cost and 15 D. Link cost and 16 Answer: B
|
Question 1.
What is the network layer responsible for?
A. Providing the physical address to the packet.
B. Determining the path to the remote host.
C. Providing reliable communications from host to host.
D. Formatting the PDU.
Answer: B
Question 2.
Which of the following are basic router functions? Choose two.
A. Perform a Layer 2 header lookup
B. Broadcast a Layer 2 packet to all the interfaces.
C. IP header examination.
D. Determine the best path to the destination.
Answer: C, D
Question 3.
Which ATM adaptation layer is usually used for transporting IP datagrams?
A. AAL1
B. AAL2
C. AAL 3
D. AAL 5
Answer: D
Question 4.
Which of the following are data rates defined for Ethernet operation over copper and fiber optic cabling? (Choose three.)
A. 1 Mbps
B. 10 Mbps
C. 1000 Mbps
D. 10,000 Mbps
Answer: B, C, D
Question 5.
An Ethernet switch receives a frame addressed to an unknown destination.
Assuming the frame is error-free, what will the switch do with the frame?
A. Hold it in a buffer until it learns the port on which the destination is located
B. Flood the frame out all ports except the source port
C. Filter the frame and restrict it only to the source port
D. Age out the source address forwarding table entry
Answer: B
Question 6.
How does collision detection operate in the CSMA/CD algorithm?
A. It allows multiple hosts to exchange data simultaneously on the same medium
B. It allows multiple hosts to share the same medium by ensuring that only one host can transmit
at a time
C. Detects collisions on a full-duplex link
D. A host will only transmit upon receipt of the token
Answer: B
Question 7.
The Media Access Control (MAC) sub-layer is responsible for which two functions? (Choose two.)
A. Directly interface with the transport layer
B. Link integrity testing
C. Physical addressing
D. Data transmission synchronization
Answer: C, D
Question 8.
What is the purpose of carrier sense in the CSMA/CD algorithm?
A. To ensure the host is able to detect an operational physical link before transmitting.
B. The host is able to detect the transmission speed of the Ethernet switch port to which the host
is connected
C. The host will only transmit data when it detects that no other devices are transmitting
D. The host will only transmit upon a timer expiry
Answer: C
Question 9.
Which statement best describes a Spanning Tree Protocol (STP) root bridge/switch?
A. It is the switch on the network with the lowest bridge priority value
B. It is the switch with the highest numeric Media Access Control (MAC) address
C. It is the only switch on the network through which traffic flows
D. It is responsible for removing duplicate frames from the network
Answer: A
Question 10.
An Ethernet switch with redundant links has the following entries in its Forwarding Data Base (FDB):
MAC Address Port
00:60:AC:1F:E0:11 1
00:F0:DE:12:3C:87 2
It receives on port 2 a frame with the source Media Access Control (MAC) address 00:60:AC:1F:E0:11, and destination address 00:F0:DE:12:3C:87.
What will the switch change in its FDB?
A. It will remove the previous entry for MAC 00:F0:DE:12:3C:87 and replace it with a new one
mapping this address to port 1
B. It will set a timer on the previous entry for MAC 00:60:AC:1F:E0:11 and create a new entry
mapping this address to port 2
C. Replace the previous entry for MAC 00:60:AC:1F:E0:11 with a new one mapping this address
to port 2
D. It will create a new entry for MAC address 00:60:AC:1F:E0:11 mapping this address to port 2
and a new entry for MAC address 00:F0:DE:12:3C:87 mapping this address to port 1
Answer: C
|
looking for lastest dumps plz help me thanks
|
Got success thanks for itcertkeys.com rocking site buddy thanks
|
Want to update give me proper dumps thanks buddy
|
lucky dump for me i just got success thanks for itcertkeys.com
|
Great collection site u must visit itcertkeys.com thanks
Copyright © 2004 CertsBraindumps.com Inc. All rights reserved.