Question 1.
The declaration of inter-switch ports with the command "admin-pt2pt-mac"is part of the configuration of: (Select all that apply)

A. Per VLAN Group Spanning tree (PVGST) or Topology Groups
B. 802.1D
C. 802.1w
D. 802.1s

Answer: C, D

Question 2.
What are OSPF routers that run multiple protocols and serve as gateway to routers outside an area and those operating with different protocols?

A. redistribution router
B. autonomous system boundary router
C. area border router
D. autonomous system

Answer: B

Question 3.
Which Foundry CLI command is used to summarize routes advertised from an ASBR into and OSPF autonomous system?

A. summary-routes 10.1.0.0 255.255.0.0
B. summary-address-info 10.1.0.0 255.255.0.0
C. summarize-routes 10.1.0.0 255.255.0.0
D. summary-address 10.1.0.0 255.255.0.0

Answer: D

Question 4.
BGP4 contains a peer discovery process.

A. True
B. False

Answer: B

Question 5.
What do you call a BGP4 Autonomous System that has been subdivided into multiple, stub ASs?

A. paths
B. cluster
C. neighbors
D. confederation

Answer: D

Question 6.
IP address 176.100.34.25 255.255.248.0 is a member of which host range?

A. 176.100.32.0 -176.100.39.248
B. 176.100.31.1 - 176.100.39.248
C. 176.100.32.0 - 176.100.39.254
D. 176.100.32.1- 176.100.39.254

Answer: D

Question 7.
Which Foundry CLI Show command can be used to identify the Interface Type of a particular port?

A. monitor
B. interfaces
C. debug
D. media

Answer: D

Question 8.
What is the default administrative distance for OSPF?

A. 110
B. 255
C. 90
D. 1

Answer: A

Question 9.
Which 802.1d state will a switches Root Port and Designated Port enter after the 2 nd expiration of the forwarding-delay timer.

A. Forwarding
B. Blocking
C. Learning
D. Listening

Answer: A

Question 10.
Switch ITCertKeys 2 (see diagram) is running 802.1w (RSTP), with default settings. It has a crossover cable between ports e38 and e48. Select the combination of port titles that match the ports.
 
A. e38: Backup Port e48: Designated Port
B. e38: Root Port e48: Alternate Port
C. e38: Designated Port e48: Designated Port
D. e38: Alternate Port e48: Root Port
E. e38: Designated Port e48: Backup Port.

Answer: E

Question 11.
Which Foundry CLI command can be used to see the IPX networks your router can forward to?

A. show ip
B. show route
C. show ipx route
D. show ipx

Answer: C

	Web www.certsbraindumps.com